This is a pain to do, but follow to get up and running: The DSP codec can be installed on Vista using the following procedure: 1. Acquire tssoft32.acm and tsd32.dll at The Download link is half way down the page. Open the Windows System32 directory 3. If tssoft32.acm is present, rename it tssoft32old.acm. Either way, proceed to the next step 4.
Place tssoft32.acm and tsd32.dll into the Windows System32 directory 5. Create the following registry entry: a. Folder (you may need to create some of these folders: KEYCURRENTCONFIGSoftware Microsoft windows CurrentVersion Drivers32 msacm.trspch b.
Dsp Group Truespeech Codec Download
Set REGSZ value to: tssoft32.acm c. No need to reboot, just close regedit 6. You can verify that the codec installed correctly by going to WMP 11 Help and clicking on “Technical Support Information”. A webpage will open listing all the codecs installed. If tssoft32.acm is listed, you’re set! OK, I found an easier way: 1.
Open Windows Explore goto C:/Windows/System32 and Rename tssoft32.acm to tssoft32OLD.acm 2. Click Here to Download tssoft32.acm save in C:/Windows/System32 folder 3. In Control Panel, go to Add Hardware.
Click Next and after it searches choose Yes, I have already connected the hardware Click Next. Scroll down to the bottom of the Installed harware list and choose Add a new hardware device Click Next. Choose Install the hardware that I manually select from a list (Advanced) Click Next. Choose Sound, video and game controllers from the Common hardware types list. Click on the Have Disk button.
Click Browse 10. Navigate to the C:/Windows/System32 folder 11. Choose $winnt$.inf Click Ok. (if you cant find that file try mmdriver.inf ) 12. Click Continue Anyway if you get a warning box. Select DSP Group TrueSpeech Audio CODEC from the list. Click Next again to install.
Restart if necessary. Voice should now work if you followed the steps correctly. I have a vista hp pavillion dv9000 which was bought in oct 2007.
Dsp Group Truespeech Tm Software Codec Free Download
My problem is I'm trying to convert dvd's to wmv so they can be used on the Disney Mix Max I have all the programs they say you need but I keep getting the message the requested audio codec in not installed on this system (0xc00d0bc2) what is that? I have been all over the net trying to find it but after I download it it says I have a newer version already installed. Where do I find it and get it installed.
I really need laymen terms as I'm not real good on the computer and some terms make no sense to me. Any HELP will be greatly appreciated.I'm using the Windows Media Encoder.
Dear all i'm using windows vista and when i try to open voice in conferances of yahoo messenger i always can't open it and i really need it abd everytime i try to open voice it displays a msg that audio compression codes are missing or incompatible so i tried to find why is that and found in yahoo this help but couldn't apply it on windows vista so plz can anyone help me in this problem yahoo help:- 1-Press the 'Start' button in the lower left corner of the screen. 2-Select 'Settings,' then 'Control Panel,' then 'Multimedia.' The Multimedia Properties window should be displayed. 3-Click on the 'Devices' tab. 4-Click on the plus-symbol (+) next to 'Audio Compression Codecs' to expand the list of installed codecs. 5-If 'DSP Group TrueSpeech(TM) Audio CODEC' is displayed, go to step 13. 6-If 'DSP Group TrueSpeech(TM) Audio CODEC' is not displayed, it needs to be installed.
You will need your Windows CD-ROM (or will need to locate the Windows installation files on your computer). 7-Press the 'Add' button. The Add window should be displayed.
8-Select 'DSP Group TrueSpeech(TM) Audio CODEC' from the list of drivers, then press the 'OK' button. 9-If the 'Driver Exists' warning is displayed, press the 'Current' button. 10-You will be prompted to restart Windows.
You may restart now or later, but the codec will not be available until you restart your computer. 11-If you are still receiving the same error message after restarting your computer, continue to the next step. 12-Open the Multimedia Devices window as directed in steps 1-4. 13-Select 'DSP Group TrueSpeech(TM) Audio CODEC' from the list of Multimedia Devices, and press the 'Properties' button.
The Properties window is displayed. 14-Verify that 'Use this audio codec' is selected and press the 'OK' button. Press the 'OK' button in the Multimedia Properties window, and try to start a voice chat again.
Drive eu preciso desse drive gothchic wrote: DSP Group TrueSpeech(TM) Audio CODEC 22-Aug-07 dear all i'm using windows vista and when i try to open voice in conferances of yahoo messenger i always can't open it and i really need it abd everytime i try to open voice it displays a msg that audio compression codes are missing or incompatible so i tried to find why is that and found in yahoo this help but couldn't apply it on windows vista so plz can anyone help me in this problem yahoo help:- 1-Press the 'Start' button in the lower left corner of the screen. 2-Select 'Settings,' then 'Control Panel,' then 'Multimedia.' The Multimedia Properties window should be displayed. 3-Click on the 'Devices' tab. 4-Click on the plus-symbol (+) next to 'Audio Compression Codecs' to expand the list of installed codecs. 5-If 'DSP Group TrueSpeech(TM) Audio CODEC' is displayed, go to step 13.
6-If 'DSP Group TrueSpeech(TM) Audio CODEC' is not displayed, it needs to be installed. You will need your Windows CD-ROM (or will need to locate the Windows installation files on your computer). 7-Press the 'Add' button. The Add window should be displayed. 8-Select 'DSP Group TrueSpeech(TM) Audio CODEC' from the list of drivers, then press the 'OK' button.
9-If the 'Driver Exists' warning is displayed, press the 'Current' button. 10-You will be prompted to restart Windows. You may restart now or later, but the codec will not be available until you restart your computer. 11-If you are still receiving the same error message after restarting your computer, continue to the next step. 12-Open the Multimedia Devices window as directed in steps 1-4. 13-Select 'DSP Group TrueSpeech(TM) Audio CODEC' from the list of Multimedia Devices, and press the 'Properties' button.
The Properties window is displayed. 14-Verify that 'Use this audio codec' is selected and press the 'OK' button.